• SURF TRACTION TAIL PADS

Description

Product Overview

A black diamond tread covers the standing area, two raised ridge strips run down the centre, and the tail lifts into an angled kick rail patterned in red and black. On the deck it reads as a finished, deliberate grip rather than a plain sheet, and on its cardboard hang card it is easy to pick out on a peg. It is the longboard traction pad we suggest to riders moving off a plain waxed deck for the first time. Wax grips while it is fresh, then wears thin, collects sand and has to be redone; a shaped pad holds its position, gives the back foot a rail to press against, and feels the same session after session. For a shop or a chain it is a simple line to carry: one design, one hang card, a strong look on the shelf and a reference you can reorder against when the shelf runs down.

Key Features

  • Diamond tread across the standing area: The pattern runs the full length of the surfboard tail pad, so the back foot finds an edge whichever way it lands, wet or dry.
  • Angled kick rail: The tail lifts into a shaped rail that stops the back foot sliding off the end through a hard turn, and the red and black pattern makes that edge easy to read underfoot.
  • Raised centre ridge strips: Two lines down the middle of the surfboard traction pad give the arch of the foot a place to sit, so the stance lands in the same spot session after session.
  • Cushioned but firm: There is enough give in the surfing traction pad to take the sting out of a heavy landing, without the surface going spongy or vague underfoot.
  • An outline that covers more than one deck: On a shortboard it sits compactly behind the rear fin; on a wider tail the same shape reads as a longboard traction pad.
  • A look that carries the board: Black tread against a red and black patterned tail gives a board a finished appearance that photographs well for a shop's own listings.

Fitting & Care

  1. Strip the old grip first: lift the worn pad or scrape off old wax with a plastic scraper, clean the residue away and let the deck dry completely.
  2. Look over the tail before anything else — the leash plug, the fin box and the area around the surfboard fins, plus any older ding repair. The pad needs sound laminate underneath it, not a soft spot.
  3. Dry-fit the surf traction pad with its backing still on: set it on the tail, check that the kick rail lands where the back foot pushes, and mark the outline with tape.
  4. Check the margin of the surfboard tail pad along both rails before you commit; an even margin left and right looks right and keeps the pad clear of the rail band.
  5. Peel a few centimetres of backing, align the pad to your marks, press the leading edge down, then peel the rest as you work toward the tail.
  6. Press from the centre outward with the heel of your hand, chasing trapped air ahead of you; a roller helps along the kick rail and the ridge strips.
  7. Leave the board flat and out of the water so the adhesive settles before it goes back on the surfboard rack.
  8. Rinse with fresh water after salt sessions, keep solvent cleaners off the tread, avoid leaving the board in a hot car or direct sun, and press down any edge that starts to lift at the start of a new season.

Applications

  • First shaped grip: A rider who has only used wax gets an obvious step up — this surfing traction pad gives the back foot a tread, a ridge and a kick rail that wax cannot hold in place. - Shop repair bays: One surfboard tail pad on the wall covers most refits that come through the door, and a sharp blade and a steady hand are all the fitting takes. - Rental fleets and surf schools: Boards wear at the tail first, so a pad that refits quickly keeps the fleet out on the water, and the same order can carry a new surf leash for each board.

Specifications

Product typePeel-and-stick surfboard traction pad, supplied singly
Product referenceNo.00563
SurfaceBlack diamond tread with raised centre ridge strips
TailAngled kick rail with red and black pattern
FinishMatte, non-gloss surface
BackingFlat adhesive backing, peel-and-stick
OutlineContoured sheet with a shaped tail edge
PackagingCardboard hang card
Board fitShortboard tails, longboard traction pad refits and rental decks

Companion Accessories

LeashHypalon surf leash models in 6 ft, 7 ft, 8 ft and 9 ft lengths, plus regular and SUP leashes
FinsHoneycomb, timber, G10 glass and nylon surfboard fins with single-tab and double-tab bases
TractionCentre pads, skimboard pads and waxless pads that fill out the rest of the deck
CoverBasic bags, regular bags and stretch covers for storage and travel
RackWall, storage, display, bike and travel surfboard rack options
Fit-upLeash strings, fin accessories and wax inserts to complete the set

Ordering & Delivery

Orders are built around your range plan rather than a single pad. Tell us which designs you want, how many of each and where they need to land, and we will confirm quantity, price and the production slot against your season. Pads are supplied on their hang cards, and a mixed accessory order can be planned as one shipment so the pads, leashes, fins, covers and surfboard rack options arrive together.

Private-label work needs your artwork, colour direction and the deck outline you are fitting to before production is scheduled; our team confirms the details before anything is cut. If you would rather judge the tread and the adhesive yourself first, ask your sales contact about sample availability. Payment terms, shipping terms and delivery dates are confirmed on the quotation, so check them against your own timetable before you commit.

Scale & Supply Capability

CIMI is a factory-based supplier with 16 years in surf and watersports hardgoods, manufacturing at our own facility rather than sourcing through traders. Chain stores, supermarkets and surf-brand stores buy from us because one supplier covers a full accessory assortment, so a season's order and its reorders can be planned together. We take on OEM and private-label work, adapting designs, colourways and branding to your programme, and we schedule production against your agreed range plan. Send us your buy list and target dates, and we will confirm what we can make and when.

FAQ

Will this pad work as a first upgrade from a plain waxed deck?

Yes. It is the shape we suggest when a rider has only used wax: the diamond tread, the ridge strips and the kick rail give the back foot something solid to work against, and the surf traction pad keeps that feel long after wax would have worn away. Riders who already run grip across the front of the board usually add a front or centre pad instead, because the deck ahead of the tail is already covered.

Can the pad be trimmed to fit a narrower tail?

Yes. Trimming a surfing traction pad along the outline is normal practice, and it is far easier before the backing comes off: tape the outline you want, cut from the edge inward with a sharp blade, and leave the kick rail intact so the back foot still has its stop. Take a little at a time rather than all at once, and dry-fit again before you peel.

How does the pad sit around the surf leash plug?

Leave the plug clear. Set the pad so the plug and its screw sit in the gap at the tail, or trim around them if the outline runs close — a surf leash that has to fight the pad will pull at the deck every time you come off. Dry-fit with the leash attached if you are unsure; it is a two-minute check that saves lifting the pad afterwards.

Will the pad interfere with the rear surfboard fins?

It should not. The pad belongs on the deck, not over the fin box, so position it so the box screws and the base of the rear fins stay clear. On a board with a short tail, trim the pad's rear edge rather than letting it run over the box. If you are fitting a set of surfboard fins at the same time, mount them first and place the pad afterwards.

Can this surfboard traction pad be produced in our own colourway or under our brand?

Yes. The colourway, the patterned kick tail and your own branding can be adapted for a private-label programme, and we handle this kind of change with chain stores and surf board manufacturers as a routine job. Send the artwork and the deck outline you are working to, and our team will confirm what can be matched before production is scheduled.

Leash

Fins

Traction

Cover

Rack

Regular longboard ankle leash for medium to large waves or a longer board
The CIMI Surf Leash Hypalon 8ft 7mm is the ideal choice for surfers seeking a durable and reliable leash. Made with high-quality Hypalon, this leash offers exceptional strength and comfort, ensuring a safe and enjoyable surfing experience.
Regular leash for medium-sized waves and all-around conditions
Lightweight leash for small to medium-sized waves
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
The CIMI Double Tab Surf Fins are crafted to boost your surfing performance. With high-quality construction and superior design, these fins offer enhanced stability, control, and durability.
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
Enhance your surfing experience with CIMI's high-performance Surf Traction Tail Pads. Designed for durability and superior grip, these tail pads provide exceptional control on your surfboard.
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description