• SURF LEASH HYPALON 7FT 7MM
  • SURF LEASH HYPALON 7FT 7MM
  • SURF LEASH HYPALON 7FT 7MM
  • SURF LEASH HYPALON 7FT 7MM
  • SURF LEASH HYPALON 7FT 7MM
  • SURF LEASH HYPALON 7FT 7MM
  • SURF LEASH HYPALON 7FT 7MM
  • SURF LEASH HYPALON 7FT 7MM
  • SURF LEASH HYPALON 7FT 7MM
  • SURF LEASH HYPALON 7FT 7MM
  • SURF LEASH HYPALON 7FT 7MM
  • SURF LEASH HYPALON 7FT 7MM
  • SURF LEASH HYPALON 7FT 7MM
  • SURF LEASH HYPALON 7FT 7MM

L00572H SURF LEASH HYPALON 7FT 7MM

No.L00572H
Regular leash for medium-sized waves and all-around conditions
  • SURF LEASH HYPALON 7FT 7MM
  • SURF LEASH HYPALON 7FT 7MM
  • SURF LEASH HYPALON 7FT 7MM
  • SURF LEASH HYPALON 7FT 7MM
  • SURF LEASH HYPALON 7FT 7MM
  • SURF LEASH HYPALON 7FT 7MM
  • SURF LEASH HYPALON 7FT 7MM

Description

Product Overview

The L00572H is a 7ft surf leash built on an ultra-light hypalon cuff and a 7 mm TPU cord. The point of the construction is weight at the ankle. A thick padded cuff feels good on the shop wall and heavy in the water after an hour, so this hypalon surf leash uses a thin, strong cuff that leaves the ankle free to move and still holds its shape under load. The cord is top-grade TPU with the stretch and recovery that keeps a leash from twisting around itself, and the hardware is stainless rather than plated. For a shop or a rental fleet, that makes for a simple counter explanation: a leash for everyday conditions, light on the ankle, with a rail saver that looks after the board. It fills the middle of a hypalon display — not the shortest small-wave length and not the long one — so it carries the volume without competing with either end of the range. - Ultra-light hypalon cuff — the cuff is the first thing a customer touches, and here it is deliberately thin: strong construction without the bulk of a double-padded neoprene cuff, so the ankle stays free through a whole session. - Top-grade TPU cord — a thermoplastic polyurethane cord that stretches and recovers instead of taking a set, which is what keeps the leash stable when the board is pulled through the wash. - Streamlined rail saver — the saver is cut to a slim profile so it lies against the rail instead of standing off it, spreading the pull across the board rather than concentrating it at the plug. - 316 stainless steel swivels — marine-grade swivels at the connection points, chosen so salt water does not seize them and the cord does not load up with twist. - Balanced 7 mm cord — a surf leash 7 mm in diameter sits between the 5 mm and 6 mm small-wave models and the 8 mm and 9 mm builds for longer boards, which is why it works as an all-round stock line. - Everyday ankle fit — as a surfboard ankle leash it is quick to fit and quick to strip off, which matters on a rental counter or a shop wall where customers try before they buy.

Hardware & Rail Protection

  • 316 stainless swivels — salt water is what shortens the service life of a low-specification swivel; 316 grade resists corrosion and lets the cord turn without loading up with twist, so the leash does not coil around the ankle.
  • Streamlined rail saver — the saver spreads the pull across a wider patch of rail than the bare cord would, and because its profile is slim it does not catch on the board or on a wetsuit sleeve when the board is carried.
  • Moulded cord connectors — the cord runs into moulded connectors at the cuff and saver ends, so the bend at each junction is controlled rather than left to a knot or a stitched loop.
  • A short, simple load path — cord, connector, swivel, rail saver, plug. Every junction is a place where a leash could fail, so we keep the number of junctions low and the parts standard across the range.
  • Specification that repeats — because every custom surf leash is built in our own factory, the swivel grade and the rail saver shape stay the same from the first order to the reorder, which is what a chain store needs when it replenishes mid-season.

Cuff & Ankle Fit

  • Sits flat under a wetsuit leg — the cuff is thin enough for a suit seal to close over it without rucking, which is where a bulky cuff usually starts to irritate.
  • Hook-and-loop closure — the strap sets once and stays set; check the tail is tucked before a customer paddles out, because a loose tail catches water and works the closure open.
  • Bare ankle or booted — it works over a bare ankle in summer water and over a neoprene boot in winter, and there is less padding to hold water between sessions.
  • Long-session comfort — the reason to choose a hypalon surfboard ankle leash is how it feels in the last half hour, not in the shop: less bulk means less to notice while the rider is busy.
  • Steady pull — the surf leash 7 mm cord keeps tension even rather than snatching, so the cuff stays where it was fitted instead of rotating around the ankle.
  • Fleet handling — quick to hand out, quick to rinse and quick to inspect at the end of a session, which is what a rental desk needs from a leash.

Waves & Board Pairing

Take this leash to the beach your customers actually surf. We rate it for small to medium-sized waves and all-round conditions — waist-high to a little overhead on a normal beach break, with enough cord to let the board tumble without loading the rail. The 7ft surf leash length is the practical middle: on a shortboard it keeps the board close enough to grab on the way through the shore break, and on a mid-length there is still enough reach that the board is not tugging at the ankle every time it rolls.

Where it stops is where the board gets longer or the water gets heavier. A longboard surf leash needs more length to keep the rail clear on a bigger board, and the 8ft 7 mm or 9ft 8 mm hypalon models are the ones to put in front of that customer. For stand-up paddleboards, offer the SUP leashes in the range instead, because the cuff and cord are built for a different load. Saying that plainly at the counter saves a return later, and it makes the 7ft model look like a considered choice rather than the length you happened to stock.

Care & Replacement

Rinse the leash in fresh water after a salt session, swivels included, and dry it in the shade. A cord left hanging in full sun goes chalky long before it wears through, and a swivel left with salt in it stiffens within a few weeks of regular use. Coil it loosely for storage rather than folding it around a fin or a rack bar, because a hard crease in a TPU cord is the start of the next failure.

Before each session, run the cord through your fingers either side of the connectors and look for nicks, cloudiness or a flattened section; check that the cuff closure still grips and that the swivels turn freely. Retire the leash when the cord shows abrasion at a connector or the closure stops holding, and never use it to tie a board down or to tow anything — a surf leash is designed for one job. For a shop, the same two-minute check at trade-in is worth more than any durability claim: it catches most failures before a customer finds them in the water.

Leash Range & Accessories

  • The hypalon line in order — 5ft 5 mm, 6ft 6 mm, 7ft 7 mm, 8ft 7 mm, 9ft 8 mm and 10ft 7 mm. Stocking two or three of those lengths covers small waves through to a longboard surf leash without leaving an obvious gap on the wall. - Regular leashes — the same kind of length spread with a double-padded neoprene cuff, for customers who want cushioning rather than a light cuff. - Specialist builds — non-slip cuffs, coil leashes that store compactly, and SUP knee and ankle leashes for paddleboards. - The rest of the wall — honeycomb, timber, G10 glass and nylon fins in single-tab and double-tab options; tail pads, centre pads, skimboard pads and waxless pads; basic bags, regular bags, stretch covers and BB bags; travel racks and tie-downs, storage racks, display racks and bike racks.

Specifications

The TPU is the cord itself: a thermoplastic polyurethane that stretches under load and recovers, which is what stops a leash setting into a permanent kink after a season of use. Polypropylene forms the strap and webbing parts that have to keep their shape without soaking up water. Neoprene sits where the cuff meets skin or wetsuit, and nylon carries the stitching and lining that hold the assembly together. The stainless steel is in the swivels, specified as 316 grade so salt water does not lock them up. None of it is decorative. As a surf leash manufacturer we fix the cord grade and the stainless grade before anything else, because those are the two parts that decide whether a leash comes back to you as a return or as a reorder. The hypalon surf leash cuff is a separate decision from the cord: hypalon lets us build a cuff that stays thin and light while still holding its shape, which is why this model sits in the lightweight half of the range rather than with the padded neoprene leashes.

Ordering & Branding

  1. Fix the size slot first. Tell us how many 7ft units you want beside the 6ft and 8ft hypalon models — quote L00572H for the 7ft 7 mm — and we will build the run around the mix you need rather than a single length.
  2. Settle the colourway. Cuff, cord and rail saver colours are agreed per order; send the combination you want and we will confirm what we can run.
  3. Send artwork if you need branding. For a custom surf leash, logo placement on the cuff and rail saver, plus sleeve printing, is signed off before production starts.
  4. Choose the packing format. Tell us whether the leashes should ship in shelf-ready sleeves for display or in bulk for your own packing line.
  5. Confirm quantities and the delivery schedule with your sales contact. Production is booked against the agreed range plan, so the earlier the mix is fixed, the easier the schedule is to hold.
  6. Ask about sample availability before committing a season's range. Cuff feel and cord stiffness are the two things a photograph cannot show.
  7. Flag any labelling or documentation your account needs, and we will confirm what can travel with the shipment.
  8. Think about the wholesale surf leash programme as a whole. If the 7ft moves well, the same cuff and cord specification carries across the 6ft, 8ft and 9ft models, so the reorder is a straight repeat.

Scale & Supply Capability

CIMI is a factory-based supplier with 16 years in surf and watersports hardgoods, manufacturing at our own facility rather than sourcing through traders. Chain stores, supermarkets and surf-brand stores buy from us because one supplier covers a full accessory assortment, so a season's order and its reorders can be planned together. We take on OEM and private-label work, adapting designs, colourways and branding to your programme, and we schedule production against your agreed range plan. Send us your buy list and target dates, and we will confirm what we can make and when.

FAQ

Is a 7ft surf leash long enough for a mid-length or a small longboard?

For most mid-lengths and smaller longboards in everyday surf, yes. At 2.1 m the 7ft surf leash gives the board room to roll without running out of stretch, and the rail saver stays clear of the tail. Once the board goes past about eight feet, or the customer is regularly in waves with real push, move them up to the 8ft 7 mm or 9ft 8 mm hypalon models, where the extra length keeps the rail clear when the board travels further on a wipeout.

What does a hypalon cuff give a surfer that a padded neoprene cuff does not?

Less bulk at the ankle. Our regular leashes use a double-padded neoprene cuff, which is cushioned and forgiving; this hypalon surf leash uses a thinner cuff with strong construction, so there is less material between the ankle and the water and less to notice over a long session. Surfers who wear a tight wetsuit seal, or who dislike a thick cuff under the ankle, usually prefer it — while anyone who wants maximum padding should be pointed at the regular range.

Should I stock this alongside a longboard surf leash or instead of one?

Alongside it. A longboard surf leash only earns its slot if your customers actually ride longboards in waves with some size; this 7ft model covers shortboards and mid-lengths, which is where most accessory volume comes from. Lay the display out by length — shortest to longest — so the 7ft reads as the step a customer takes after a 6ft rather than as another similar-looking leash.

How does the 7 mm cord compare with the 6 mm and 8 mm models?

A surf leash 7 mm in diameter is the middle of the cord range. The 5 mm and 6 mm leashes are lighter and more flexible, which suits small waves and lightweight boards; the 8 mm and 9 mm builds carry more cord for longer boards and bigger surf. At 7 mm there is enough material to hold up in shoulder-high conditions without making a shortboard feel tethered, which is why it works as the everyday size.

Is this surfboard ankle leash suitable for rental fleets and surf schools?

It is a practical choice for them. The cuff is light and quick to fit, the closure is easy to check, and the swivels and rail saver can be inspected in seconds between sessions. As a surf leash manufacturer we keep one specification across the range, so a fleet that is replaced piece by piece still matches. Order the lengths that match the boards on the beach — a mixed rack of shortboards and soft-tops usually means mostly 7ft with a few 6ft.

Can we order it as a custom surf leash with our own logo?

Yes. Logo placement on the cuff and rail saver, cuff and cord colours, and sleeve printing are all agreed before production. Send your artwork and the colourway you have in mind and our team will confirm what can be run and how the wholesale surf leash order will be scheduled. Where you can, leave the cord and swivel specification as it is — those are the parts that decide how the leash performs in the water.

Leash

Fins

Traction

Cover

Rack

Regular longboard ankle leash for medium to large waves or a longer board
The CIMI Surf Leash Hypalon 8ft 7mm is the ideal choice for surfers seeking a durable and reliable leash. Made with high-quality Hypalon, this leash offers exceptional strength and comfort, ensuring a safe and enjoyable surfing experience.
Regular leash for medium-sized waves and all-around conditions
Lightweight leash for small to medium-sized waves
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
The CIMI Double Tab Surf Fins are crafted to boost your surfing performance. With high-quality construction and superior design, these fins offer enhanced stability, control, and durability.
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
Enhance your surfing experience with CIMI's high-performance Surf Traction Tail Pads. Designed for durability and superior grip, these tail pads provide exceptional control on your surfboard.
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description